Raise3D Pro 3 Display Panel Replacement Guide

Are you looking to upgrade the display panel on your Raise3D Pro 3 3D printer? Dive into expert tips and step-by-step instructions to seamlessly replace the display panel without a hassle. Discover the tools required and the precise actions needed to ensure a successful replacement process for your printer’s display panel.

Replace Raise3D Pro 3 Printer Display Panel

If you need to replace the display panel on your Raise3D Pro 3 3D printer, follow these steps:

1. Remove the Old Display Panel:

   • Use a screwdriver to remove the screws that hold the old display panel in place.
   • Disconnect the cable that connects the display panel to the motherboard of the printer.

2. Install the New Display Panel:

   • Take out the old display panel.
   • Replace it with the new display panel.

For more detailed instructions, you can refer to the official Raise3D Support Center. They provide step-by-step guides for replacing the touchscreen assembly on both the Pro2 Series and the Pro3 Series printers.

Additionally, if you’re looking for an alternate source for a replacement screen, you might want to explore options beyond the official Raise3D store. Some community members have suggested alternatives, such as checking out SparkFun. Keep in mind that compatibility and quality are essential factors when choosing a replacement part.

Display Panel Evaluation Guide for Raise3D Pro 3 3D Printer

Let’s assess the display panel of the Raise3D Pro 3 3D printer. To ensure a safe and efficient evaluation, follow these steps:

1. Tools Needed:

   • 2mm hex wrench
   • 2.5mm hex wrench

2. Turn Off the Printer:

   • Power off the printer and disconnect it from the power source.

3. Remove the Touchscreen Assembly:

   • Use the 2.5mm hex wrench to remove the 3 screws in the same line circled in red on the side of the touchscreen assembly.
   • Next, use the 2mm hex wrench to remove the 4 screws on the touchscreen assembly and take off the cover.

4. Power-On Check:

   • After reassembling the touchscreen, power on the printer to verify if the screen display is functioning properly.

Remember to handle the components carefully and follow safety precautions outlined in the user manual

Remove Display Panel on Raise3D Pro 3: Step-by-Step Guide

If you need to remove the display panel on your Raise3D Pro 3, here are some tips to guide you through the process:

1. Tools Needed:

   • You’ll need a 2.5mm wrench and a 2mm hex wrench for this task.

2. Step-by-Step Removal:

   • Unplug the Wires: Before starting, unplug the wires connected to the display panel.
   • Remove the Cover Screws:
     • Use the 2.5mm wrench to remove the 3 screws on the side of the touchscreen assembly (circled in red).
     • Next, use the 2mm wrench to remove the 4 screws on the touchscreen assembly and take off the cover.
   • Replace the Display Panel:
     • Carefully remove the old display panel by disconnecting it from the motherboard.
     • Replace it with the new display panel.
     • Secure the new panel by reversing the steps above.

Remember to handle the components gently and follow safety precautions. If you encounter any issues, refer to the official Raise3D documentation or community forums for additional guidance

Installing Display Panel on Raise3D Pro 3D Printer: Step-by-Step Guide

Here are the steps for installing the display panel on your Raise3D Pro 3 3D printer:

1. Remove the Old Display Panel:

   • Unplug the wires connected to the old display panel.
   • Remove the three screws from the front panel to detach the old screen from the frame.

2. Access the Back Cover:

   • Use a 2mm hex wrench to remove the retaining screws on the back cover of the screen box.
   • Open the back cover to access the interior.

3. Remove the Magnetic Bar:

   • Locate the magnetic bar inside the screen box.
   • Use a 2.5mm hex wrench to remove the screw holding the magnetic bar in place.

4. Install the New Touchscreen Assembly:

   • Take the new touchscreen assembly.
   • Tighten the ground wire screw using a 2.5mm wrench.
   • Insert the five connecting wires into their respective slots.

5. Secure the New Display Panel:

   • Connect the cable from the new display panel to the printer’s motherboard.
   • Replace the screws to hold the new display panel securely in place.

6. Test the New Display Panel:

   • Turn on the printer and ensure that the new display panel functions correctly.
   • Confirm that all buttons and touch features are responsive.

Remember to follow safety precautions during installation, and refer to the user manual for any additional details

Resolve Raise3D Pro3 Plus 3D Printer Troubleshooting Challenges

It seems you’re encountering some challenges with your Raise3D Pro3 Plus 3D printer. Let’s dive into the issues you’ve described and explore potential solutions:

1. Runout Sensor Issue:

   • You mentioned that the runout sensor didn’t trigger, causing problems. While cleaning it with canned air helps temporarily, a better solution could be implementing a physical sensor (similar to Prusa Mk3s) that doesn’t require frequent cleaning and works well with transparent filaments.
   • Suggestion for Raise3D: Consider incorporating a ball-bearing-based sensor for improved reliability.

2. Print Adhesion and Warping:

   • Even with Raise PLA, you faced issues with prints not sticking to the bed. Frequent cleaning with warm water and isopropyl alcohol helped, but it’s cumbersome.
   • The actual solution was manual first-layer calibration. The existing calibration wizard isn’t effective. You might find better results by manually adjusting the z-height for a single-layer thick 20x20mm square.
   • Suggestion for Raise3D: Introduce a live Z-calibration mode for fine-tuning the first layer during printing.

3. Calibrating Non-Raise3D Filaments:

   • The flow rate calibration cube and temperature towers work well. However, the height of the flow rate calibration cube could be reconsidered.
   • Suggestion for Raise3D: Provide a mode for live Z-calibration during printing, allowing adjustments for different filaments.

Remember that 3D printing can be intricate, and fine-tuning is often necessary. I recommend checking for firmware updates and restoring factory settings if needed. If you encounter further issues, consider reaching out to Raise3D support

In conclusion, mastering the replacement of the Raise3D Pro 3 display panel is within your grasp with the right guidance at your fingertips. By following the outlined steps diligently and utilizing the recommended tools, you can enhance the functionality of your 3D printer effortlessly. Remember to handle components delicately and refer to official Raise3D resources for additional support if needed.

Elevate your printing experience by embarking on the journey of upgrading your Raise3D Pro 3 display panel with confidence and precision.