MGN12 MGN7 MGN15 MGN9 100 300 1000mm Miniature Linear Rail Slide 1pc MGN9 Linear Guide+1pc MGN9H Carriage Cnc 3D Printer Parts Review

  • Aliexpress ID: 4001111429353
  • Price: €14.03
  • Posted: January 6, 2023

The Review of: MGN12 MGN7 MGN15 MGN9 100 300 1000mm Miniature Linear Rail Slide 1pc MGN9 Linear Guide+1pc MGN9H Carriage Cnc 3D Printer Parts Review

Let’s delve into the world of miniature linear rails and explore the components you’ve mentioned.

  1. MGN Rails:

    • These are precision ground steel rails that allow a carriage to travel along their length. They are commonly used in CNC machines and have gained popularity in hobby 3D printers and laser cutters.
    • The Hiwin brand is well-known in this domain. MGN9, MGN12, and other rail names are part of Hiwin’s naming system. Other manufacturers like IKO, THK, and NSK also produce similar rails.
    • The naming convention is straightforward: the number in MGN9/MGN12/MGN15 indicates the rail width in millimeters.
    • Carriages come in two lengths: C (short) and H (standard length). The hole spacing changes depending on the length.
    • Weight is an important consideration when mounting these rails onto a gantry.
  2. Linear Rails vs. V-Wheels:

    • V-wheels are an alternative to linear rails, commonly used in 3D printers and budget laser cutters.
    • V-wheels ride on V-shaped grooves of aluminum extrusions, making them cost-effective for large machines.
    • However, they require careful tightening and maintenance as they loosen over time. Properly installed V-wheels can still provide good accuracy.
  3. Linear Rails vs. Smooth Rods:

    • When comparing smooth rods to linear rails, the key difference is play or clearance.
    • Linear bearings designed for smooth rods tend to fit loosely, resulting in poor load-bearing capacity.
    • Linear rails, with tighter tolerances, offer better precision and less play.
    • Smooth rods are often used in conjunction with linear bearings, but they lack the same rigidity as linear rails.
  4. Your Specific Components:

    • You mentioned MGN12, MGN7, MGN15, and MGN9 rails, along with various lengths (100mm, 300mm, 1000mm).
    • The MGN9H carriage slides across the MGN9 rail using recirculating balls.
    • These components are commonly used in CNC machines and 3D printers.
Share: