FYSETC Voron 2.4 R2 3D Printer Upgraded 3D Printer Parts with Klicky-Probe Leveling Upgraded Kits Review

The FYSETC Voron 2.4 R2 is an upgraded 3D printer that comes with several enhancements and additional features. Let’s delve into the specifics:

1. Extrusion Head Hub Board (Afterburner_Toolhead_X_PCB): This addition improves the extrusion process. It’s accompanied by a hub board wiring harness with Teflon insulation.

2. Z-Axis Limit Switch Board (HARTK Z AXIS ENDSTOP MICROSWITCH PCB): The inclusion of this board enhances the accuracy of Z-axis positioning.

3. Labeled Harnesses: A full set of labeled harnesses simplifies the wiring process, making assembly more straightforward.

4. PVC Cable Duct: The addition of a PVC cable duct helps organize and protect the wiring.

5. Hot Bed Insulation Cotton: This insulation cotton helps maintain a stable printing temperature for better print quality.

6. VORON Nevermore V5 Air Purifier: The Nevermore V5 air purifier ensures cleaner air during printing.

7. Klicky-Probe Leveling Upgrade Kit: Equipped with the Klicky-Probe leveling system, your prints will benefit from precise bed leveling.

8. Omron Leveling Switch: The Omron leveling switch further enhances bed leveling accuracy.

In terms of hardware components, the kit includes:

• Fasteners: A set of fasteners specifically designed for the Voron V2.4 R2.

• Motion Components:

  • GATES GT2 Open Belts: Two belts, 1800/2000mm long (6mm wide), and four belts, 1100/1200mm long (9mm wide).
  • GATES GT2 Belt Loop: Four loops, each 188mm long (6mm wide).
  • GT2 Pulleys: One 20T pulley (5mm ID, 6mm width) and three 16T pulleys (5mm ID, 6mm width).
  • GT2 Toothed Idlers: Two 20T idlers (5mm ID, 6mm width) and four 20T idlers (5mm ID, 9mm width).
  • GT2 80T Pulleys: Four 80T pulleys (5mm ID, 6mm width).
  • Bearings: Twenty F695 bearings and twelve 625 bearings.
  • Shafts: Four 5x60mm shafts and one 5×29.5mm shaft.
  • Linear Rails: Six MGN9H rails (350/400mm) and one MGN12H rail (350/400mm).

• Vibration Management:

  • Four rubber compressor feet to reduce vibrations.

• Electronics:

  • Afterburner_Toolhead_X_PCB: The extrusion head hub board.
  • Other electronic components not explicitly listed in the image details.

The FYSETC Voron 2.4 R2 offers an impressive array of upgrades, making it an excellent choice for 3D printing enthusiasts. Keep in mind that this kit does not include the print parts or Raspberry Pi, so you’ll need to source those separately if required.