ANYCUBIC Wash & Cure 3 Plus Washing Curing 2 in 1 Machine For Photon Mono M5s LCD 3D Printer 3D Printing Models Review

  • Aliexpress ID: 1005002473521794
  • Price: €200.14
  • Posted: November 29, 2022

The Review of: ANYCUBIC Wash & Cure 3 Plus Washing Curing 2 in 1 Machine For Photon Mono M5s LCD 3D Printer 3D Printing Models Review

The ANYCUBIC Wash & Cure 3 Plus is an advanced 2-in-1 machine designed for efficient post-processing of 3D prints. Let’s delve into its features:

  1. Size Upgrade: Compared to the Anycubic Wash & Cure Plus, the washing volume of the basket has increased by approximately 13.4%, resulting in a 7.6-liter washing basket and a total washing bucket volume of 12 liters. This size upgrade makes it suitable for light-curing 3D printers with a build volume of 10.6 inches or smaller. Additionally, the curing size has increased by 42%, accommodating larger models up to φ220 x 260 millimeters in a single post-processing session.

  2. Enhanced Curing Effect: The innovative Flexicure gooseneck lights design boosts energy output by 30,000uW/cm² within the 1-3cm irradiation range. This enhancement significantly improves curing details, such as the model’s top and skirt. The Anycubic Wash & Cure 3 Plus employs a brand-new arrangement of lamb beads combined with a lens light source, resulting in a 20% improvement in curing uniformity compared to the previous generation.

  3. Dual-Layer Design: The dual-layer PP material cleaning basket supports washing with the platform. It offers adjustable heights of 150 millimeters and 250 millimeters, accommodating printing platforms from 6.6 to 10.6 inches and maximizing alcohol usage efficiency. The dual-layer curing platform increases the number of models cured per cycle, significantly improving curing efficiency.

  4. Simple Operation and Quiet Environment: Easily toggle between cleaning and curing modes with one click. The enhanced gooseneck light curing mode can also be turned on or off with a single click. Adjust cleaning and curing times from 1 to 30 minutes as needed. Thanks to a more sealed structural design and software optimization, the noise interference during cleaning and curing is reduced, creating a quieter and more comfortable working environment (measured at < 65dB in the operating state).

For more information, you can visit the official product page.

Share: