The Ultimate Guide to Creality Ender 3 S1 Pro Electronics Board

Welcome to the world of 3D printing, where innovation and technology converge to bring your creative ideas to life. Today, we delve into the realm of the Creality Ender 3 S1 Pro, a cutting-edge 3D printer featuring the advanced Creality Ender 3 S1 Pro Electronics Board. This upgraded motherboard promises enhanced performance, reliability, and a host of new features that cater to both beginners and experienced enthusiasts.

Let’s unravel the intricacies of this silent powerhouse that is set to revolutionize your printing experience.

Key Features of the Ender-3 S1 Pro Silent Motherboard

The Creality Ender-3 S1 Pro 3D printer features an upgraded electronics board known as the V2.4.S1 Silent Motherboard. Here are some key details about this motherboard:

• Advanced 32-Bit Mute Mainboard: The Ender-3 S1 Pro comes equipped with a 32-bit silent motherboard that ensures quieter operation during printing. The use of TMC2208 stepper motor drivers contributes to this reduced noise level, making it less than 50 decibels while printing.

• Plug & Play: The firmware for the Ender-3 S1 series is pre-installed and pre-configured on this motherboard, making it a hassle-free replacement. Simply install it, and you’re ready to print without any additional setup.

Key Features of Creality Ender 3 S1 Pro

The Creality Ender 3 S1 Pro boasts several notable features that set it apart from its predecessor, the Ender 3 S1. Let’s delve into the specifics:

1. All-Metal Sprite Pro Extruder: One of the most significant upgrades is the inclusion of an all-metal Sprite Pro Extruder. Unlike the regular Ender 3 S1, this extruder can handle temperatures up to 300°C without a PTFE tube inside the heat break. This design eliminates the need for periodic maintenance, making it a durable and reliable choice for printing.

2. 32-Bit Silent Motherboard: The Ender 3 S1 Pro is equipped with a 32-bit silent motherboard featuring TMC2208 drivers. These drivers significantly reduce noise during printing, ensuring a quieter experience. Additionally, the board uses an ARM STM32F401 CPU, which enhances performance compared to the STM32F103 chip found in the regular Ender 3 S1.

3. CR Touch Automatic Leveling: The printer features automatic bed leveling using the CR Touch sensor. This ensures precise and consistent first layers, simplifying the setup process for users.

4. 4.3-Inch Color Touch Screen: The Ender 3 S1 Pro comes with a user-friendly 4.3-inch color touch screen for intuitive navigation and control. You can easily adjust settings, load files, and monitor your prints directly from the screen.

5. Spring Steel PEI Magnetic Build Plate: The build surface is made of spring steel with a PEI magnetic surface, providing excellent adhesion and easy print removal. No more struggling with stubborn prints sticking to the bed!

6. Wide Filament Compatibility: The Ender 3 S1 Pro supports various filament types, including PLA, ABS, WOOD, TPU, PETG, and PA. Whether you’re a beginner or an experienced user, you’ll have flexibility in material choices.

7. Modern Design and Build Quality: The printer features a sleek and modern design with a smooth metal frame and flat cables. It’s not just functional; it looks good too!

In summary, the Creality Ender 3 S1 Pro combines performance, convenience, and durability, making it a compelling choice for 3D printing enthusiasts. If you’re looking for an upgrade with advanced features, this “fully-loaded” machine is worth considering.

Benefits of Creality Ender 3 S1 Pro Electronics Board

Let’s explore the advantages of the Creality Ender 3 S1 Pro electronics board:

1. All-Metal Sprite Pro Extruder: One of the most significant upgrades in the Ender 3 S1 Pro is the inclusion of an all-metal Sprite Pro Extruder. Unlike the regular Ender 3 S1, this extruder is capable of printing up to 300°C. Importantly, there is no PTFE tube inside the heat break, which eliminates the need for maintenance over time.

2. Direct Drive Extrusion System: The Ender 3 S1 Pro features a direct drive extrusion system, which is more reliable and requires less maintenance compared to side-mounted bowden extruders. This design ensures smoother filament feeding and reduces the chances of jamming. Additionally, it makes working with flexible materials easier.

3. Improved Print Quality: With the Creality Ender 3 S1 Pro Electronics Board, you can expect a marked difference in print quality. The advanced technology on this board ensures precision in every print, enhancing the overall output.

4. Reliability: This upgrade guarantees reliability in your 3D printing tasks. Whether you’re a hobbyist or a professional, having a reliable electronics board is crucial for consistent and successful prints.

For more details, you can refer to the full review of the Creality Ender 3 S1 Pro.

Installation Guide for Creality Ender-3 S1 Pro Electronics Board

Let’s walk through the installation process for the Creality Ender-3 S1 Pro electronics board. Here are the steps:

1. List of Main Parts:

   • Before we begin, let’s familiarize ourselves with the main components. These include items like screws, limit switches, and the printer port. Refer to the user manual for detailed illustrations and descriptions.

2. Install the Printer:

   • Nozzle Module and Wire Clamp:
     • Place the nozzle module on the back of the extruder.
     • Pre-lock the nozzle with 4 M3x6 hexagon socket head cap screws and tighten them.
     • Clamp the wire clamp onto the X motor black plate.
   • Gantry Installation:
     • Move the right profile of the bottom module 35 mm out of the desktop to reveal the installation hole.
   • Screen Installation:
     • Attach the screen bracket to the side of the plastic on the right.
     • Tighten it with 3 M4x30 hexagon flat round head screws.
   • Rack Installation:
     • Fix the threaded end of the filament tube fittings to the right end of the rack.
     • Fit the front slot of the installed rack to the front slot of the profile and press down to clamp the bottom of the profile.

3. Wiring:

   • Connect the components as follows:
     • Nozzle to the 24-pin port.
     • X-axis and Z-axis stepper motors following the yellow label on the 6-pin (4 wires) port.
     • X-axis limit motor according to the yellow label on the 3-pin (2 wires) port.
     • 3-pin (3 wires) 2.0 port to the pinboard.
     • 3-pin (3 wires) 2.54 port to the filament detector.

4. Auto Leveling:

   • Adjust the Z-axis compensation value so that the height from the nozzle to the printing platform is about the thickness of a piece of A4 paper.

5. Assisted Leveling:

   • Enter the assisted leveling interface.
   • Adjust the Z-axis compensation value to match the thickness of an A4 paper.
   • Return to the previous menu.

6. Loading the Filament, First Printing, and Start Printing:

   • Follow the instructions in the user manual and videos provided on the SD card included with the printer.

For more detailed instructions, refer to the Ender-3 S1 Pro User Manual.

Customizing Firmware for Creality Ender 3 S1 Pro

Customizing the firmware for your Creality Ender 3 S1 Pro can enhance its performance and features. Let’s explore the steps and options:

1. Firmware Downloads:

   • Visit the Creality Ender-3 S1 Pro Software & Firmware Download page on Creality’s official website. Here, you can find the product manual, firmware, and slicing software for your printer.
   • Alternatively, you can also check out the GitHub repository by synman for customized firmware options.

2. Updating the Firmware:

   • To update the firmware, follow these general steps:
     • Download the appropriate firmware for your machine and board (STM32F103RET6 or STM32F401RC).
     • Unzip the downloaded file and copy either the included .bin file or the STM32F4_UPDATE directory to the root of an SD card.
     • Insert the SD card into your Ender 3 S1 Pro and power cycle the printer.
     • For a visual guide, you can watch this video tutorial by Crosslink.

3. Firmware Options:

   • Stock Creality Firmware: If you want basic 3D printing functionality, stick with the stock Creality firmware.
   • Klipper: If you prefer extensive customization, Klipper is a great choice.
   • Marlin: Marlin is free, highly customizable, and widely compatible with Creality printers, including the Ender 3 series.

In conclusion, the Creality Ender 3 S1 Pro Electronics Board stands as a testament to technological advancement in the realm of 3D printing. With features such as the all-metal Sprite Pro Extruder, 32-bit silent motherboard, and CR Touch automatic leveling, this printer offers unparalleled quality and convenience. Whether you seek precision, reliability, or versatility, the Ender 3 S1 Pro Electronics Board delivers on all fronts.

Elevate your printing projects with this state-of-the-art component, and experience a new level of creativity and efficiency in your 3D printing journey.