Anycubic Kobra 2 Plus Power Supply: Ultimate Guide

Anycubic Kobra 2 Plus Power Supply: Ultimate Guide

Welcome to our detailed guide on the Anycubic Kobra 2 Plus power supply. Ensuring your 3D printer has a reliable power source is crucial for optimal performance. In this article, we will explore all you need to know about the power supply unit specifically designed for the Anycubic Kobra 2 Plus.

Let’s delve into the technical specifications, compatibility, and essential features of this power supply to understand how it can enhance your printing experience.

Anycubic Kobra 2 Plus Power Supply Details

The Anycubic Kobra 2 Plus 3D printer requires a reliable power supply to function optimally. Here are some details about the power supply for the Anycubic Kobra 2 Plus:

  • Model Type: Kobra 2 Plus
  • Manufacturer Part Number: E09010016
  • Voltage Input: The product photo shows an input range of 110-220V. However, it’s important to note that the UK power supply operates at 230V. If your current power supply is rated for 100-240V, it should be suitable for use in the UK.
  • Compatibility: The power supply is compatible with the following Anycubic 3D printers:
    • Anycubic Vyper
    • Anycubic Kobra Max
    • Anycubic Kobra Plus
    • Anycubic Kobra Go
    • Anycubic Kobra Neo
    • Anycubic Kobra 2
    • Anycubic Kobra 2 Pro
    • Anycubic Kobra 2 Neo
    • Anycubic Kobra 2 Plus
    • Anycubic Kobra 2 Max

This original replacement power supply ensures stable performance for your Anycubic Kobra 2 Plus. If you need to replace your existing power supply, consider getting the Anycubic replacement part. Remember that the product photo may differ from the actual item.

Key Features of Anycubic Kobra 2 Plus 3D Printer’s Power Supply

Let’s explore the features of the Anycubic Kobra 2 Plus 3D printer’s power supply:

  1. LeviQ 2.0 Auto-Leveling System: The Kobra 2 Plus adopts Anycubic’s LeviQ new auto-leveling system with 25-point precise leveling

  2. High-Speed Printing: The Kobra 2 Plus boasts impressive print speeds, with a maximum of 500mm/s (averaging at 300mm/s

  3. Sturdy Build Volume: With a build volume of 320 x 320 x 400mm

  4. Double Gears Extruder: The direct drive extruder features double gears, ensuring smooth filament feeding and reliable performance. Say hello to consistent and high-quality prints! 🦾

  5. Modular Assembly: The Kobra 2 Plus is designed for quick modular setup

  6. PEI Magnetic Spring Steel Build Plate: The build plate is equipped with a PEI magnetic spring steel surface

  7. Built-in Capacity: The printer comes with 8GB of built-in storage

  8. 4.3″ LCD Touch Screen

  9. Filament Detector: Keep your printing process uninterrupted with the optional filament detector

  10. Rated Power: The Kobra 2 Plus operates at 400W, ensuring efficient and stable performance during printing. ⚡

  11. Supported Materials: You can print with a variety of materials, including PLA, ABS, PETG, and TPU

  12. Dimensions and Weight: The Kobra 2 Plus measures 630 x 605 x 564mm and weighs 13kg

Remember that product prices may vary due to store promotions, so always check the latest updates on the Anycubic store page

The image shows an Anycubic Kobra 3D printer, which is an easy-to-use and affordable option for beginners.

IMG Source: nice-cdn.com


Installing and Setting Up a Computer Power Supply Unit (PSU)

Installing and setting up a computer power supply unit (PSU) is essential for ensuring your PC runs smoothly. Let’s break down the process into steps:

  1. Picking the Right PSU:

    • The first step is to choose an appropriate power supply. Consider the following factors:
      • Wattage: Calculate the total power draw of your components (CPU, graphics card, hard drives, etc.). Choose a PSU with sufficient wattage (e.g., 400 watts or more).
      • Cables and Connectors: Ensure the PSU has the necessary cables to connect all your components.
      • Form Factor: Select a model that fits your PC case.
  2. Installing the New PSU:

    • Turn Off Your PC: Unplug the power cable and turn off your computer.
    • Open the Case: Remove the side panel of your computer case.
    • Locate the Old PSU: Identify the existing power supply unit.
    • Remove the Old PSU:
      • Disconnect all cables from the old PSU (motherboard, hard drives, GPU, etc.).
      • Unscrew the PSU from its mounting location.
      • Carefully remove the old PSU.
    • Insert the New PSU:
      • Place the new PSU in the same mounting location.
      • Secure it with screws.
    • Connect Cables:
      • Attach the PSU cables to the motherboard, hard drives, and other components.
      • Ensure proper connections to avoid any loose cables.
    • Close the Case: Put the side panel back on.
    • Plug in the Input Cable: Connect the power cable to the PSU.
    • Power Up and Test: Turn on your PC to verify that everything works correctly.
  3. Safety Precautions:

    • Ground Yourself: Before handling any components, ground yourself to prevent static electricity damage.
    • Follow Safety Guidelines: Be cautious when working with electrical components.

For more detailed instructions, you can refer to this guide.

A hand is using a screwdriver to remove the side panel of a computer case.

IMG Source: discdepotdundee.co.uk


Troubleshooting Power Supply Issues with Anycubic Kobra 2 Plus 3D Printer

When it comes to maintaining your Anycubic Kobra 2 Plus 3D printer, encountering issues with the power supply can be frustrating. Let’s troubleshoot the problem step by step:

  1. Blown Fuse:

    • Check the 3D printer fuse. Most often, the fuse is located on the power supply board near the point where the power cord enters the printer.
    • Unplug your printer, open the cover, and inspect the fuse. If it’s burned out, replace it with a new one.
  2. Wrong Voltage on the Power Supply Unit:

    • Before turning on your printer, ensure that the input voltage matches the local voltage rating. Adjust the voltage using the selector switch typically located on the back of the printer.
  3. Power Supply Unit Failure:

    • Observe the power indicator light when you turn on the printer. If it doesn’t light up or the power supply fan at the bottom isn’t spinning, the power supply might be faulty.
    • Watch a video tutorial to learn how to detect and replace the PSU.
  4. Motherboard Failure:

    • Check the motherboard indicator. If there’s no solid red light when powering on, the motherboard may be broken.
    • Use a multimeter to measure the power output voltage of the motherboard. Consult the machine’s manufacturer for accurate information on the voltage levels.

Remember, if you’ve tried these steps and still can’t resolve the issue, consider seeking professional assistance. Anycubic offers one-on-one after-sales support, so share your troubleshooting results with their engineers for further guidance

Two electrical terminals, the first is a boat-shaped switch round terminal, and the second is a motherboard power cable open terminal.

IMG Source: qpic.cn


Anycubic Kobra 2 Plus vs. Competitors Comparison

Let’s delve into a comparison analysis of the Anycubic Kobra 2 Plus 3D printer’s power supply and explore its features. The Kobra 2 Plus is part of Anycubic’s high-speed FDM 3D printer series, which was introduced in September 2023 alongside other models like the Kobra 2 Neo, Kobra 2 Pro, and Kobra 2 Max.

Here’s a detailed comparison of the Anycubic Kobra 2 Plus with its counterparts:

Specification Anycubic Kobra 2 Neo Anycubic Kobra 2 Pro Anycubic Kobra 2 Plus Anycubic Kobra 2 Max
Original Price $199 $309 $449 $579
Build Volume 320 x 320 x 400mm 220 x 220 x 250mm 320 x 320 x 400mm 420 x 420 x 500mm
Extruder Direct drive Direct drive + double gears Direct drive + double gears Direct drive + double gears
Bed Leveling LeviQ 2.0 auto-leveling system (49-point) LeviQ 2.0 auto-leveling system (25-point) LeviQ 2.0 auto-leveling system (49-point) LeviQ 2.0 auto-leveling system (49-point)
Print Speed (Max.) 500mm/s 150mm/s (Avg.) 500mm/s (Max.) 300mm/s (Avg.)
Accelerated Speed 10,000mm/s² 20,000mm/s² 10,000mm/s² 10,000mm/s²
Printing Accuracy ±0.1mm ±0.1mm ±0.1mm ±0.1mm
Z-Axis Double rods and motors Double rods and single motor Double rods and motors Double rods and motors
X-Y-Axis Double metal spindles and SG15 bearing Double metal spindles and SG15 bearing Double metal spindles and SG15 bearing Double metal spindles and SG15 bearing
Build Plate PEI magnetic spring steel PEI magnetic spring steel PEI magnetic spring steel PEI magnetic spring steel
Built-in Capacity No 8GB 8GB 8GB
Filament Detector Optional Yes Yes Yes
Control Screen 4.3″ LCD touch screen 4.3″ LCD touch screen 4.3″ LCD touch screen 4.3″ LCD touch screen
Nozzle Diameter 0.4mm 0.4mm 0.4mm 0.4mm
Nozzle Temperature 260°C 260°C 260°C 260°C
Hotbed Temperature 90°C 110°C 90°C 90°C
Connectivity WiFi, USB WiFi, USB WiFi, USB WiFi, USB
Rated Power 400W 400W 400W 500W
Assembly Quick modular setup Quick modular setup Quick modular setup Quick modular setup
Supported Material PLA/ABS/PETG/TPU PLA/ABS/PETG/TPU PLA/ABS/PETG/TPU PLA/ABS/PETG/TPU
Machine Dimension 630 x 605 x 564mm 486 x 435 x 463mm 630 x 605 x 564mm 740 x 735 x 640mm
Weight 13kg 8.4kg 13kg 21kg

The Anycubic Kobra 2 Plus stands out with its larger build volume (320 x 320 x 400mm) and impressive printing speed of up to 500mm/s. However, it’s essential to note that

The image shows a black power supply unit with a large fan mounted on the bottom.

IMG Source: gstatic.com



In conclusion, the Anycubic Kobra 2 Plus power supply is a vital component that ensures stability and efficiency in your 3D printing projects. With its compatibility with various Anycubic 3D printers and features like stable voltage input and built-in protection mechanisms, this power supply is designed to meet the demands of the Kobra 2 Plus. Whether you are replacing your existing power supply or troubleshooting power-related issues, the Anycubic power supply is a reliable choice.

Invest in quality and performance by opting for the Anycubic Kobra 2 Plus power supply for a seamless and productive 3D printing experience.

Comments

    Leave a Reply

    Your email address will not be published. Required fields are marked *