Ultimate Guide to Anycubic Kobra 2 Neo Electronics Board

Ultimate Guide to Anycubic Kobra 2 Neo Electronics Board

Welcome to the world of 3D printing with the Anycubic Kobra 2 Neo, where speed, precision, and affordability converge to revolutionize your printing experience. In this article, we’ll delve into the intricate details of the Anycubic Kobra 2 Neo Electronics Board, uncovering its innovative features and functionalities. Whether you’re a seasoned enthusiast or a newcomer to the realm of 3D printing, the Kobra 2 Neo is designed to elevate your printing endeavors to new heights of creativity and efficiency.

Anycubic Kobra 2 Neo Features

The Anycubic Kobra 2 Neo is an impressive 3D printer that offers both speed and precision. Let’s dive into the details:

  1. Extrusion System and Cooling:

    • The Kobra 2 Neo features a revised version of Anycubic’s well-known Direct Drive Extruder. This extrusion system allows for quick filament melting through its 60W hot end.
    • To ensure rapid cooling and proper model formation, the printer is equipped with a 7000 rpm cooling fan. This cooling mechanism helps maintain quality even at high speeds.
  2. Printing Speed:

    • With impressive printing speeds of up to 250 mm/s, the Kobra 2 Neo allows you to experience motion without compromising on quality.
  3. Affordability:

    • Elevate your printing endeavors with this 3D printer that combines precision and affordability. The Kobra 2 Neo could be your prime choice for a fast-speed 3D printer priced under $200.

For more information, you can explore the official Anycubic Kobra 2 Neo page here. If you encounter any issues during use, feel free to seek post-sales consultation on their official channels, and they’ll respond within a working day

Anycubic Kobra 2 Neo 3D Printer Specifications

The Anycubic Kobra 2 Neo is an impressive entry-level 3D printer that combines speed, precision, and affordability. Let’s delve into the specifications of its electronics board:

  1. Maximum Printing Space: The Kobra 2 Neo offers a build volume of 220 x 220 x 250 mm.
  2. Maximum Nozzle Temperature: It can reach a maximum nozzle temperature of 260°C.
  3. Maximum Heated Bed Temperature: The heated bed can go up to 110°C.
  4. Compatible Filaments: You can use various filaments, including PLA, PETG, TPU, and ABS (with enclosure).
  5. Print Speed Range: The print speed typically falls within the range of 60-100 mm/s.
  6. Bed Leveling: The Kobra 2 Neo features a convenient 25-point automatic leveling system.

For more details, you can explore the official Anycubic Kobra 2 Neo product page.

The image is a photograph of the circuit board of a 3D printer.

IMG Source: 3idea.in

Anycubic Kobra 2 Neo Installation Guide

Let’s get you started with the Anycubic Kobra 2 Neo electronics board installation. Here are the steps to guide you through the process:

  1. Quick Assembly:

    • You’ll need a set of hex keys and a wrench that come with the Kobra 2 Neo.
    • Follow the Quick Start Guide for Anycubic Kobra 2 Neo to assemble the printer efficiently. The guide covers fast assembly, initial setup, and your first print.
  2. Inspect Before Power-Up:

    • Before powering up the printer, ensure that all connections are secure and components are properly installed.
    • Double-check the wiring, connectors, and any additional modules (such as heated beds or extruders).
  3. Initial Setup:

    • Connect the electronics board to the power supply and the display screen.
    • Verify that the firmware is up-to-date. If not, follow the instructions provided by Anycubic to update it.
    • Calibrate the printer bed and level it accurately.
    • Set the correct temperature settings for the hotend and heated bed.
  4. First Print:

    • Load filament into the extruder.
    • Choose a test print file (such as a calibration cube) and start the printing process.
    • Monitor the print closely to ensure everything is functioning correctly.

Remember to refer to the official Anycubic Kobra 2 Neo User Manual for detailed instructions and safety precautions. Additionally, you can find helpful videos on the ANYCUBIC-UK Guide Videos page.

An image of the circuit board of a 3D printer, with labels indicating the function of each pin.

IMG Source: github.io

Troubleshooting Anycubic Kobra 2 Neo Electronics

Let’s troubleshoot the Anycubic Kobra 2 Neo electronics board. If you’re experiencing issues with your 3D printer, particularly related to filament not coming out or other electronic problems, here are some steps you can take:

  1. Filament Not Coming Out of the 3D Printer:

    • Nozzle Issues: A clogged nozzle is a common cause of filament not extruding properly. Residual filament, debris, or dust can accumulate in the nozzle, obstructing the flow. To address this:
      • Check the nozzle temperature and adjust it to the optimum temperature for the printing material you’re using.
      • Inspect the nozzle for clogs and clean it if necessary. Be cautious when working with high temperatures.
    • Extruder Issues: The extruder, responsible for pushing material through the printer, can malfunction. Ensure it’s functioning correctly:
      • Verify that the extruder is advancing the filament properly.
      • If you’re using special materials (e.g., flexible TPU), adjust the extruder and hot end settings accordingly.
      • Ensure the filament quality is good; wet or tangled filament can cause extrusion problems.
    • Filament Issues: Poor-quality filament or improper storage can lead to extrusion problems. Make sure your filament is dry and untangled on the spool.
  2. Printer Not Turning On:

    • If your printer isn’t turning on, consider the following:
      • Use a multimeter to measure the power output voltage of the motherboard. Be cautious while working with electrical components.
      • For the Anycubic Kobra Neo, a stable voltage around 24V is normal. If there’s no stable signal, it may indicate a faulty motherboard.
  3. Leveling Issues:

    • If you’re facing leveling problems, follow these steps:
      • Check the Z-axis V-shaped pulleys:
        • Power on the Anycubic Kobra 2 and raise the Z-axis to the middle height.

Remember to follow safety precautions when troubleshooting electronic components. If you encounter any specific issues, consult the Anycubic Kobra 2 Neo User Manual for detailed guidance

A blue and black Anycubic Kobra 3D printer with the build plate removed, a circuit board, and a screwdriver on a white table.

IMG Source: ytimg.com

Comparison of Anycubic Kobra 2 Neo and Kobra Neo Build Surfaces

Let’s compare the Anycubic Kobra 2 Neo with its predecessor, the Kobra Neo, in terms of their electronics boards:

  1. Printing Speed:

    • The Kobra 2 Neo outperforms the Kobra Neo in printing speed. If you’re looking for a high-speed printer, the Kobra 2 Neo is an excellent choice for beginners.
  2. Convenience:

    • When it comes to assembly, the Kobra Neo is easy to put together and gets up and running quickly. Fewer newbies prefer spending more time assembling a new printer, so this convenience factor is noteworthy.
  3. Build Surface:

    • Both machines use a PEI-coated metal sheet for their build surfaces.
    • However, the Anycubic Kobra 2 Neo features a double-sided PEI-coated sheet, effectively doubling the lifespan of the build surface compared to the Kobra Neo.

A 3D printer is printing a black plastic object.

IMG Source: shopify.com

In conclusion, the Anycubic Kobra 2 Neo Electronics Board stands as a beacon of technological advancement in the world of 3D printing. With its cutting-edge features such as rapid printing speeds, precise extrusion system, and user-friendly assembly process, the Kobra 2 Neo offers a compelling option for both beginners and experienced users alike. By exploring the capabilities of the Kobra 2 Neo, you open the door to a world of limitless creative possibilities.

Embrace the future of 3D printing with the Anycubic Kobra 2 Neo Electronics Board and unlock a realm of innovation at your fingertips.


    Leave a Reply

    Your email address will not be published. Required fields are marked *